Signal Conditioners, Temperature Transmitters and Controllers
Modbus RTU, Modbus TCP, Canbus, PLC's and Hmi's.
Call toll Free 1 887 877 4to 20mA or 1 877 486 2062
  • DAT7130.
  • DAT7130 FEATURES

    • 4 Relay outputs CANopen.
    • 8 Digital Inputs to CANopen.
    • DIP Switch Configurable.
    • DiA DS and CiA DS 401 Compliance
    • DIN Rail Mounted.

CANopen Slave Device Digital Inputs and Outputs DAT7130

General Description

The DAT7130 accept inputs from up to 8 digital inputs and is able to drive 4 relay outputs. The analog signal is converted to 16 Bit data and Transmitter by the CANopen protocol.

The DAT7130 is compliant with CiA DS 301 and CiA DS 401 and can interface directly with the CAN Controllers that accepts CiA DS 301 and CiA DS 401Standards.

The Baud rate and the ID can be programmed by DIP switches positioned on the side of the enclosure. The Enclosure is DIN rail mounted and is 22.5 mm thick. The terminals are plug in so the device can be hot swapped. The DAT7130 is isolated up to 2000 Vac for 1 minute between the Input, CANopen network and the power supply.

INPUT
8 Digital Inputs.
OUTPUT
4 Relays.
POWER SUPPLY
Power Supply Voltage 18-30Vdc
Reverse polarity protection 60Vdc
CURRENT CONSUMPTION
45 mA
CONFIGURATION
DIP Switch Configurable.
ISOLATION
Between Input/Output/Power Supply 1500Vac.
EMC
For Industrial environments
Immunity EN 61000-6-2
Emission EN 6100-6-4
HOUSING
Material self-extinguishing
Dimensions W x H x T
3 1/2" x 4 1/2 " x 1/2"
90 x 112x x 12.5 mm
Weight 3 oz 90 g
TEMPERATURE
Operating Temperature -4°F +140°F -20°C +60°C
Storage Temperature -40°F +185°F-40°C +85°C
Humidity (non condensing) 0-90%

 

Specifications

Input: 8 Channels
Off State Below 3 Vdc
On State Between 10 and 30Vdc
Output 4 Channels
Relay 0 and 1 SPDT
Relay 2 and 3 SPST
Power Supply: 18 to 30 Vdc. Reverse polarity protection 60 Vdc.
Current Consumption: Current output 35 mA max. Voltage output 25 mA max.
Temperature rating: Operative- 4°F +158°F - 20°C +70°C
  Temperature Storage Temperature - 40°F +185°F - 40°C +85°C.
Humidity: (non condensing) 0-90%.
Housing: Material Self-extinguishing.
Dimensions: 4" x 4 1/2 " x 1", 100 x 120x x 22.5 mm.
Weight: 3 oz 90 g.
EMC. For industrial environments.
  Immunity: EN 61000-6-2.
  Emission: EN 61000-6-4.
Configuration: PC Configurable and DIP Switch Configurable

Drawings

Input  
D 0 Terminal 16 and 12
D 1 Terminal 16 and 13
D 2 Terminal 16 and 14
D 3 Terminal 16 and 15
D 4 Terminal L and P
D 5 Terminal M and P
D 6 Terminal N and P
D 7 Terminal O and P
Output  
Relay 0 Common 1 Normally open 2 Normally closed 3
Relay 1 Common 4 Normally open 5 Normally closed 6
Relay 2 Common 7 Normally open 8
Relay 3 Common 9 Normally open 10
CAN Network Terminal D and F Ground E
Power Supply Positive B Negative A

DAT7130 wiring Diagram.


Applications

  • 8 Digital Input for CANopen.
  • 4 Relay Outputs CANopen slave.
Back to General Description