Signal Conditioners, Temperature Transmitters and Controllers
Modbus RTU, Modbus TCP, Canbus, PLC's and Hmi's.
Call toll Free 1 887 877 4to 20mA or 1 877 486 2062
  • CANbus Voltage input.

    • Current to CANopen.
    • Voltage to CANopen.
    • DIP Switch Configurable.
    • DiA DS and CiA DS 401 Compliance
    • DIN Rail Mounted.

CANopen Slave Device Voltage and Current DAT7015

General Description

The DAT7015 accepts Voltage and Current inputs. The span of the inputs can be -10V to 10V and the mA input can be - 20mA to 20mA. The analog signal is converted to 16 Bit data and Transmitter by the CANopen protocol.

The DAT7015 is compliant with CiA DS 301 and CiA DS 401 and can interface directly with the CAN Controllers that accept CiA DS 301 and CiA DS 401 Standards.

The Baud rate and the ID can be programmed by DIP switches positioned on the side of the enclosure. The Enclosure is DIN rail mounted and is 22.5 mm thick. The terminals are plugged in so the device can be hot swapped. The DAT7015 is isolated up to 2000 Vac for 1 minute between the Input, CANopen network and the power supply.

4 X 4-20mA, 0-20mA, 0-10V +/-10V, +/-20mA.
Power Supply Voltage 10-30Vdc
Reverse polarity protection 60Vdc
45 mA
DIP Switch Configurable.
Between Input/Output/Power Supply 1500Vac.
For Industrial environments
Immunity EN 61000-6-2
Emission EN 6100-6-4
Material self-extinguishing
Dimensions W x H x T
3 1/2" x 4 1/2 " x 1/2"
90 x 112x x 12.5 mm
Weight 3 oz 90 g
Operating Temperature -4°F +140°F -20°C +60°C
Storage Temperature -40°F +185°F-40°C +85°C
Humidity (non condensing) 0-90%



Input: Voltage -10V to +10V,0-10V.
Current -20mA to +20mA, 4-20mA.
Output: CANopen
Power Supply: 10 to 30 Vdc. Reverse polarity protection 60 Vdc.
Current Consumption: Current output 35 mA max. Voltage output 25 mA max.
Temperature rating: Operative- 4°F +158°F - 20°C +70°C
  Temperature Storage Temperature - 40°F +185°F - 40°C +85°C.
Humidity: (non condensing) 0-90%.
Housing: Material Self-extinguishing.
Dimensions: 4" x 4 1/2 " x 1", 100 x 120x x 22.5 mm.
Weight: 3 oz 90 g.
EMC. For industrial environments.
  Immunity: EN 61000-6-2.
  Emission: EN 61000-6-4.
Configuration: PC Configurable and DIP Switch Configurable


Channel 0 Terminal 4 and 3
Channel 1 Terminal 9 and 8
Channel 2 Terminal 15 and 14
Channel 3 Terminal O and N
Current mA  
Channel 0 Terminal 5 and 3
Channel 1 Terminal 10 and 8
Channel 2 Terminal 16 and 14
Channel 3 Terminal P and N
CAN Network Terminal D and F Ground E
Power Supply Positive B Negative A

CANbus Thermocouple wiring Diagram.


  • 4 Channel CANopen slave for 4-20mA's.
  • 4 Channel CANopen slave for 0-10V.
  • 4 Channel CANopen slave for -10V to +10V.
Back to General Description