Data Acquisition.

The Datexel range of Data Acquisition equipment includes Modbus RTU Masters and Slaves, Modbus Input, Modbus Output Modules, Modbus Isolation Modules and Modbus Repeaters. The range also includes converters (RS485, USB, RS232, RS422, TCP-IP). By combining these units with the DAT3000 and DAT3500 series a complete solution for your Data Acquisition can be found from Datexel. The DAT9550 is a remote Modbus display unit that can be programmed to accept data from Modbus slaves or masters such as a PLC or the DAT9000 range of Modbus controllers.

The DAT9000 and DAT9011 Modbus Masters and Modbus Slaves range of controllers have Ethernet, RS485, RS232 and USB ports. Options on these units have on board digital and analog IO and the DAT9011DL has data logging capability that logs data from not only it's own inputs but the DAT3000 series and other connected slaves from other manufacturers. The data is logged to the USB port which is situated on the front face of the DAT9011DL and can take an 8G USB thumb drive.

The DAT3000 series is a range of analog and digital input and output modules. The communication is either RS485 or RS232 and can be Modbus or ASCII protocol. The analog inputs can be mA, Thermocouple, RTD, Potentiometers, mV and Voltage. The analog output can be either current or voltage. The digital input can be voltage and the output can be selected from relays, NPN or PNP transistor outputs.

The DAT3500 series is a range of communication isolators and converters which includes isolating RS485, RS232, RS422 signals from the field to the control room. It is also able to extend the range of the signals. The options that are available are RS232 to RS485 or RS422, USB to RS485 or RS422, Ethernet to RS485 or RS422, Ethernet to RS485.

Communication ConvertersModbus Analog Input ModulesModbus Analog Output ModulesModbus Digital Input output Modules

Communication Converters and repeaters Modbus Analog Input Modules Modbus Analog Output Modules Modbus Digital Input output Modules