Signal Conditioners, Temperature Transmitters and Controllers
Modbus RTU, Modbus TCP, Canbus, PLC's and Hmi's.
Call toll Free 1 887 877 4to 20mA or 1 877 486 2062

HMI Touch Screen Panels

PLC's

The TD240-11AD is a 3.5 inch Touch Screen HMI with a built in PLC. The TD240 can accept inputs from 4 analog sensors and 16 digital inputs. It also has 4 0-10Volt analog outputs and 16 solid state relays up to 700mA each.
The TD240-11AD can accept inputs from K type Thermocouples, S type Thermocouples, J type Thermocouples, T type Thermocouples, R type Thermocouples, E type Thermocouples. Pt100, Ni100, Pt1000 and Pt500 Resistance temperature detectors. NTC10K Ohm and PTC1 K Ohm Thermistors. 0-20mA, 4-20mA, 0-20mV, 0-1Volt and 0-10Volts.
The output is 0-10V 16 bit and can be set up as a control output with P, PI, PID or PD. Other function blocks include timers, up counters, down counters, mathematics, logic functions and rescale.
The TD320 is a 5.7 inch touch screen HMI that has a TFT LCD display. With the aid of the MCM260 family of Modbus Data Acquisition modules various analog and digital inputs and outputs can be added to the TD320.
The TD430 is a 4.3 LCD TFT Touch screen Windows CE panel PC with 16 million colors. The TD430 runs on an ARM processor with 256MB flash memory with a RS485 serial port that can run up to 115200 Baud rate. It also has an Ethernet port, 2 USB ports and an SD Ram slot. It can operate as a Modbus RTU Master or Slave and also be a CANopen Master. There is also a RJ45 connection for a Modbus TCP/IP connection.
The TD700 is a 7 Inch Touch Screen HMI using Windows CE as an operating system. The display is an LCD TFT and has 800 x 480 pixels with 16 million colors. The TD700 runs on a 200 MHz ARM processor with 256MB flash memory and has the following Communication ports RS232, RS485, USB, Ethernet and SD Card. The protocols on these ports are CAN open, Modbus Master/Slave and Modbus TCP/IP.
The TD750 is a 7 Inch Panel PC running on Windows 7 and has an Intel ® Atom ® N2800 Processor at 1,8Ghz and 1 MB of Cache. It also has a 16 or optional 64 GB Solid State Hard drive 2GB DDR3 SD RAM or optional 4GB. The display is a 24 bit LVDS and has 800 x 600 pixels with LED back-light display.

TD240-11AD

HMI with PLC's=

Input 4 x Thermocouples, 4 x Voltage, 2 RTD,
Output 4 x 0-10V
Digital

TD320

5 Inch Touch Screen HMI

Input 8 Digital

TD430

Windows CE Touch Screen Panel PC=

Input with options 2 Load Cell, 8 Digital IO, 2 Analog outputs.
Modbus, Canopen, Modbus TCP/IP

TD700

Windows CE Touch Screen Panel PC

Input with options 2 Load Cell, 8 Digital IO, 2 Analog outputs.
Modbus, Canopen, Modbus TCP/IP

TD750

Windows 7 Panel PC with Modbus


7 Inch
Modbus, Canopen, Modbus TCP/IP