PC Programmable RTD Temperature Transmitter DAT1010.
GENERAL DESCRIPTION
The economical DAT1010 Hockey Puck Temperature Transmitter is an RTD Head Mount Temperature Transmitter. The input also accept mV's, Potentiometers and resistance Inputs. The DAT1010 "in head Mount Temperature Transmitter" is PC Programmable. The sensor, range, zero and linearization, is programmable with the Prodat Software, available from DATEXEL. The input is measured, linearized and converted to the industrial standard of 4-20mA signal. The RTD and resistance input has the added feature of selecting 3 or 4 wire for higher accuracy. There is a burn out failure alarm that can be programmed to drive the output signal High and Low. The input on the DAT1010 has a high range of tolerance and the DAT1010 can accept any voltage between 10 V and 32 Volt. The power is Loop Powered.
The sensor inputs are programmable.
- RTD Pt100
- RTD Pt1000
- RTD Ni100
- RTD Ni1000
- mV -100mV to 700mV Minimum span 2 mV
- Potentiometer 0-200 Ohm, 0-500 Ohm, 0-2 K
- Resistance 0-2000Ohm Minimum range 10 Ohm.
The DAT1010 is accurate to 0.1% full scale mV Linear and has less than 0.02%/'f thermal drift.
The DAT1010 is in compliance with the standard 89/336/CEE on the Electromagnetic Compatibility.
The DAT1010 is housed in a self-extinguish plastic enclosure suitable for DIN B in-head mounting.
There is a mounting kit available to mount the DAT1010 on DIN rail.
