R Type Thermocouple Converter DAT2145R PC Programmable.
GENERAL DESCRIPTION
The thermocouple Converter DAT2145R is a Din Rail mount temperature Converter with DIP Switch programmability.
The output can be Voltage or Current.
Suitable for the following thermocouples.
K Type Thermocouples
J Type Thermocouples
S Type Thermocouples
R Type Thermocouples
T Type Thermocouples
The DAT2145R will linearize the voltage input and provide a 4-20mA output signal.
The DAT2145R is accurate to 0.1% full scale and has less than 0.02%/'f thermal drift.
It is possible to set the minimum and maximum values of the input and output ranges in any point of the scale, keeping the minimum span shown in the table below. Also high burn out indication or low burn out indication is selectable.
The DAT2145R is in compliance with the standard 89/336/CEE on the Electromagnetic Compatibility.
The DAT2145R is housed in a plastic enclosure of 12.5 mm thickness suitable for DIN rail mounting in compliance with EN-50022 and EN-50035 standards.
The DAT2145R has internal cold junction compensation.
The Calibration of zero and span values is made by the ZERO and SPAN potentiometers located on the top of device.
